Tampa Bay mold removal using soda blasting is best used on larger projects where wood studs are exposed and have been contaminated with Florida black mold or other types of mold. On projects where mold is simply on the surface of drywall, or can be cleaned, the mold soda blaster is not needed. Feel free to contact us at any time if you have questions in regards to mold soda blasting or the possibility of mold soda blasting on your project
A Tarpon Springs homeowner contacted I Destroy Mold in regards to black mold removal needed in their kitchen. The owner of the Tarpon Springs home was performing a kitchen remodel and decided to remove the kitchen cabinets himself in order to save some money. What he discovered was a very small water leak on the kitchen faucet. Over time this water leak dripped down the back of the cabinet and caused a black mold problem. The black mold in this Tarpon Springs home affected not only the cabinets but the wall the cabinets were attached to as well. Once the black mold was found, the Tarpon Springs homeowner contacted I Destroy Mold to remove the mold from the home. As you can see in the pictures below, the black mold damage to the cabinets is severe. If you find black mold or any type of mold in your Tampa Bay area home, we recommend to not disturb the mold before calling a professional. A slight disturbance can generate air born mold spores which can potentially affect other areas of your home.
[box type=”info”] If you have any questions regarding black mold or mold removal, contact I Destroy Mold today. We are available 24 hours per day to respond to water damage emergencies as well as answer any of your questions regarding mold, black mold and mold removal services in the Tampa Bay area.[/box]
A pantry closet in a nice home in the Westchase area of Tampa experienced a small water leak from a water jug that led to mold damage. As you can see in the pictures below, the moisture from the leaking water jug caused the building materials in the pantry to become a host for mold growth. With the high humidity here in the Tampa Bay area, it doesn’t take much moisture for mold growth to occur. We will begin a mold removal project in this Westchase home this week. Typically the mold growth on the inside of the wall is much worse than what you can visually see on the outside of the wall. Our infrared mold inspection camera will tell us the areas containing the most moisture which is where the nucleus of the mold growth will be. Since there is still humidity and moisture inside the wall, we usually find surface mold growing in areas that far exceed where the core of the mold growth occurs.
The pictures below are from a home in Clearwater, Florida. The Clearwater residents decided to remodel their kitchen as it was done originally in the 1970’s. They were very excited about the project until their remodeling contractor removed the kitchen cabinets and found quite a bit of mold growth. The contractor was very smart in that he handled the mold the right way. As you can see in the pictures below, plastic was placed over the mold and taped into place. If you see mold or mold growth in your Clearwater home, the best thing you can do is to NOT disturb it. Mold has tiny spores that can easily become airborne and possibly effect other areas of your property. In this particular case, the contractor contained the mold damage and then called in a professional company to properly get rid of the mold before proceeding with the remodel. Avoid costly problems down the road and be sure not to disturb any mold in your property if you find it. The best thing you can do is call a professional to properly take care of the mold removal process.
[box type=”info”] If you have any questions regarding mold, or mold removal feel free to contact us at any time. We are available24 hours per day and 7 days per week to answer any of your questions regarding mold or mold removal.[/box]
Mold Found Under Seminole Cabinet. This Seminole Florida home experienced a problem with a small water leak which led to sever mold damage underneath a cabinet. Most Seminole Florida cabinets are made of particle board which acts like a sponge for water leaks. The water soaked into the cabinet which provided a great breeding ground for a mold infestation. With the high humidity here in Florida, once mold starts to grow in a Seminole or St. Petersburg property it can lead to severe problems. This cabinet must be placed under a tight mold containment so that when the mold is removed, it is not spread throughout the rest of the home. If you see mold inside of your property, call a professional in order to have it properly removed. Mold in Seminole can cause adverse health effects to Pinellas County residents if not treated properly.
[box type=”info”] We are available 24 hours per day and 7 days per week to answer any of your questions in regards to mold, and mold removal. We service cities such as Seminole, St. Petersburg, Clearwater, Tampa and the entire Tampa Bay area. Give us a call today if you believe you have a mold issue in your property![/box]
This New Tampa home experienced a large amount of mold damage. After a tub overflow in the kids bathroom, the water damage was not properly cleaned up. Shortly after the tub overflow, the AC system in the home stopped working. The Tampa home owners decided to wait to fix the AC until their uncle who owns an AC company returned to the Tampa area. After 10 days, a very large amount of mold began growing in the kids room. This mold growth went into the walls and even spread to the back of the television. Mold problems in Tampa should be addressed as soon as possible. After the sign of water damage or mold growth, call a Tampa mold professional to handle the mold remediation process. If water damage or mold removal is not handled properly you could experience a similar situation as in the pictures below.
[box type=”info”] If you suspect a problem with mold in the Tampa Bay area, we are available 24 hours per day and 7 days per week. Feel free to call us at any time if you have questions in regards to mold removal or mold remediation.[/box]
Excessive rain in Tarpon Springs caused black mold damage after water seeped into a structural leak during rain storms. As you can see in the pictures below, this Tarpon Springs Florida home has several cracks on and around the windows on the outside of the home. Florida homes have a tendency to settle which may lead to stress cracks. If these cracks aren’t sealed properly, your home or business could be prone to black mold. The symptoms of the mold growth showed up at the base of the wood floor as the mold began eating through the baseboards. Mold only requires a small amount of moisture whether high humidity or a water leak to begin growing. Once mold growth starts in areas where it can’t be seen it can quickly spread and lead to a serious problem. The mold removalproject at this Tarpon Springs home required removing quite a bit of black mold infested drywall from ceiling to floor. The water entered mid-way between the ceiling and floor which made a nice home for black mold growth.
[box type=”info”] If you suspect a problem with mold, black mold or are in need of mold removal services, feel free to contact us anytime. We are available 7 days per week and 24 hours per day to answer any of your questions in regards to mold and our mold removal process.[/box]
[button link=”http://www.idestroymold.com/” color=”orange” newwindow=”yes”] Best Mold Removal Tarpon Springs[/button]