Mold Removal Brandon Florida. A Brandon homeowner contacted I Destroy Mold in regards to a mold removal project in his Brandon home. Mold removal in Brandon is a very project for the team at I Destroy Mold. Mold and black mold can and will grow in areas with high humidity. If the AC unit in a particular property in Brandon has been turned off, the humidity in the indoor environment will usually rise over 60% in a short period of time. Once indoor relative humidity levels rise over 60% this will provide a perfect breeding ground for mold and black mold. As you can see in the pictures below, this particular Brandon home was vacant for quite some time and the mold began growing on walls, ceilings and even some of the floors. If you have a problem with a water leak, it is important to get that water leak located and repaired quickly to avoid the potential of having mold growth start in Brandon Florida.
[box type=”info”] If you suspect a problem with mold, black mold or are in need of mold removal services, give us a call. We are available 24 hours per day and 7 days per week in order to respond to water damage emergencies as well as answer any of your questions regarding black mold and mold removal. You can also learn more about What is mold remediation[/box]
TOPICS IN THIS MOLD REMOVAL POST: mold removal, mold, mold remediation, mold removal tampa, tampa, florida, mildew, water damage restoration
Mold Removal Clearwater Florida. A Clearwater homeowner contacted I Destroy Mold in regards to a mold removal project located in their Clearwater home. The AC condensate drain located in this Clearwater home had a small water leak on it which was dripping water very slowly whenever the AC condensate pan filled with water. This AC condensate drain was located behind the AC handler in an area that couldn’t be seen. Over time the water saturated the wall and the drywall behind the AC handler. It only takes 24 to 48 hours for mold to start growing on wall board or drywall in Florida. High humidity here in Florida will cause mold to grow more rapidly. When water leaks occur it is important to address them quickly before mold has time to form and start growing. As you can see in the pictures below, once mold growth is present and must be removed, it is a very tedious process.
[box type=”info”] If you suspect a problem with a water leak, black mold or mold growth, give us a call. We are available 24 hours per day to respond to water damage emergencies as well as answer any of your questions in regards to water leaks, mold growth and water damage.[/box]
Mold Removal Palm Harbor Kitchen. A Palm Harbor couple contacted I Destroy Mold in regards to a very intense mold removal project in their kitchen in Palm Harbor, Florida. The couple had to replace a faulty dishwasher after noticing it leaking water onto the floor. The dishwasher dripped a small puddle of water on the floor every time it ran through a cycle. Over time, this water began seeping into the wallboard or drywall behind the cabinets in their Palm Harbor kitchen. This water leak created a large mold colony to form and grow behind the cabinets. Once the couple removed the dishwasher, they were faced with a very strong musty smell. A strong musty smell is a common symptom of mold once it begins to colonize and reproduce. As you can see in the pictures below, this mold removal project will require the remodel of this Palm Harbor kitchen.
[box type=”info”] If you suspect mold, black mold or are in need of mold removal services, give us a call today. We are available 24 hours per day and 7 days per week to respond to water damage emergencies as well as answer any of your questions in regards to black mold and mold removal services.[/box]
Odessa Black Mold Removal. An Odessa homeowner contacted I Destroy Mold in regards to an extensive black mold removal project. The Odessa home was left vacant for several months without the AC running. The AC system acts as a dehumidifier and pulls moisture out of the air. Indoor environments with over 60% relative humidity can cause mold growth problem in Florida homes. Humidity in the air can attach itself to building materials causing mold to start growing. The most common mold found in Florida homes appears to be black. In order for a mold removal project to be successful all of the mold and the mold spores must be removed from the indoor environment. As you can see in the pictures below, all of the mold was removed from this property ensuring it’s safe for it to be inhabited again.
[box type=”info”] Mold can be caused by high humidity and water leaks. If you have a problem with a water leak, or a water flood, give us a call. We are available 24 hours per day and 7 days per week to respond to water damage emergencies as well as answer any of your questions regarding mold and mold removal.[/box]
A Brandon homeowner contacted I Destroy Mold in regards to a black mold removal project. The Brandon homeowner had a sewage backup occur when they were away from their property. The sewage backup caused the walls 2 feet up from the floor to become saturated with water. When the Brandon homeowner arrived to find the mess, they simply cleaned all the sewage off of the floor. When walls and studs become saturated with moisture, this provides a prime breeding ground for mold and black mold growth. As you can see in the pictures below, we had to remove the drywall and clean all of the wall studs in order to ensure the mold was completely removed from this project. Once black mold begins to grow, it will grow inside of walls where you cannot see it. With our infrared water inspection equipment we are able to see through walls where moisture hides. In Brandon, hidden moisture usually means hidden mold.
With all of the heavy rains we have been having in Tampa, a roof leak caused mold to grow in a ceiling in north Tampa. The homeowner originally noticed a slight discoloration in the ceiling in an extra bedroom and didn’t think anything of it. The moisture in the ceiling saturated the drywall in this Tampa home and it didn’t take long for the mold to start growing. Tampa is known for having high humidity, and once mold starts to grow it will just continue to get worse as it feeds off of moisture. The Tampa ceiling began to turn yellow because of the mold growth which prompted the owner of the home to give us a call. We setup containment so that the mold cannot spread to other parts of the Tampa home. Once we start our mold remediation and mold removal process we have to be careful to ensure we do not contaminate other areas of the house.
[box type=”info”] If you suspect a problem with mold in your Tampa or surrounding area property, give us a call day or night. We are available 24 hours per day and 7 days per week to answer any of your questions in regards to mold removal and mold remediation in Tampa Florida.[/box]
We were called out to a home in Clearwater Florida with the complaint of a musty smell in the bathroom. The Clearwater homeowner’s assumed that the mold or musty smell was coming from there shower and that it was normal. They thoroughly cleaned the shower over and over and even installed air fresheners in the bathroom to try and get rid of the smell of mold. After weeks of trying mold removalefforts without any success, the Clearwater home owners decided to give us a call.
Upon inspection of the bathroom, there was a colony of hidden mold behind vanity. The mold started growing after a previous water leak. The homeowners had the small water leak repaired and didn’t think anything of the damage it could have caused as the leak was very small. They had no idea that there was black mold growing behind their vanity. Mold removal can be tricky as it can easily be spread if not started the right way from the beginning.